FigabytesFigabytes Logo
Help Center / Getting Started

How to install and set up your Figabytes eSIM (iPhone & android guide)

Back to Help Center

1767105913024-Artboard 4.png

Installing your Figabytes eSIM takes just a few minutes and can be done entirely online — no physical SIM card, no store visit, no waiting. Follow the steps below to activate your plan and get connected instantly on your next trip.

This guide covers both iPhone and Android devices.

✅ Before You Begin

Make sure:

  • Your device supports eSIM
  • Your phone is unlocked
  • You have a stable Wi-Fi connection
  • You have your Figabytes QR code or Direct Install link

Once ready, choose your device below.

📱 iPhone Installation (iOS 16–iOS 18+)

You can install using a Direct Install Link or a QR code.

Method 1 — Direct Install (Recommended)

  1. Connect to Wi-Fi
  2. Open your Figabytes installation link (from email or dashboard)
  3. You’ll see a popup: “Add eSIM”
  4. Tap Continue
  5. Wait for the eSIM to download
  6. Go to Settings → Mobile Data
  7. Set Mobile Data → Figabytes
  8. Turn Data Roaming ON (for travel plans)

Your eSIM is ready — you’ll connect as soon as you enter a supported country.

Method 2 — Install via QR Code

  1. Connect to Wi-Fi
  2. Go to Settings → Mobile Data → Add eSIM
  3. Tap Use QR Code
  4. Scan your Figabytes QR code
  5. Wait for installation
  6. Set Mobile Data → Figabytes
  7. Turn Data Roaming ON

If your eSIM doesn’t activate until travel, that’s normal — activation happens when you reach your destination.

🤖 Android Installation (Samsung, Pixel, Xiaomi, Oppo, etc.)

Steps vary slightly by manufacturer, but the process is similar.

Samsung Galaxy

  1. Go to Settings → Connections → SIM Manager
  2. Tap Add eSIM
  3. Choose Scan QR Code
  4. Scan your Figabytes QR
  5. Wait for installation
  6. Set Mobile Data → Figabytes
  7. Turn Data roaming ON

Google Pixel

  1. Settings → Network & Internet
  2. Tap SIMs
  3. Tap Add eSIM
  4. Choose Download a SIM instead
  5. Scan your QR code or use the link
  6. Enable Roaming for the Figabytes line

Xiaomi / Redmi / Poco

  1. Settings → SIM Cards & Mobile Networks
  2. Tap Add eSIM
  3. Scan QR or enter details manually
  4. Set Mobile Data → Figabytes
  5. Turn Data roaming ON

Oppo / OnePlus / Realme

  1. Settings → Mobile Network
  2. Select eSIM
  3. Tap Add eSIM
  4. Scan your Figabytes QR
  5. Turn on Data roaming

🔄 Manual Installation (If QR Code Fails)

Choose Enter Details Manually and input the information provided in your Figabytes order:

  • SM-DP+ Address
  • Activation Code
  • Confirmation Code (if required)

Then save → restart your device.

🌍 After Installation — Final Setup

No matter which device you use, make sure:

1. Set Figabytes as your mobile data line

  • iPhone: Settings → Mobile Data → Mobile Data Line → Figabytes
  • Android: Settings → SIMs → Mobile Data → Figabytes

2. Turn ON Data Roaming

Required for travel eSIMs.

3. Add APN if data doesn’t start

If needed, enter the APN from your Figabytes order:

  • iPhone: Mobile Data Network → APN
  • Android: Access Point Names → Add APN

4. Restart and toggle Airplane Mode

Often fixes any connection hiccups.

Android APN Settings

Go to:

  • Settings
  • Network & Internet
  • Mobile Networks
  • Access Point Names (APN)

Create a new APN and enter the following:

APN Name: data.esim

❗ Activation Timing Reminder

Installing your eSIM does not start its validity.
Your plan begins counting when:

👉 Your phone connects to a supported network in the destination country.

So feel free to install early — just keep the line OFF until travel if your home country is included in the plan.

📩 Need Help?

If you're having trouble at any step, contact Figabytes Support and provide:

  • Device model
  • OS version
  • Screenshots of SIM settings
  • Your order ID

We’ll help you get online in minutes.