How to install a Figabytes eSIM using a QR code

Quick QR code installation guide for iPhone, Samsung Galaxy, and Android devices

Installing your Figabytes eSIM using a QR code is the fastest and easiest setup method. Once scanned, your device downloads the eSIM profile digitally without needing a physical SIM card.

This guide explains how to install your Figabytes eSIM via QR code on both iPhone and Android devices, including Samsung Galaxy and other supported Android phones.

Before you begin

Before starting installation, make sure:

• Your device supports eSIM
• Your device is unlocked
• You are connected to stable Wi-Fi
• Your device software is updated
• You have your Figabytes QR code ready

It is recommended to display the QR code on:

• A laptop
• A tablet
• Another phone
• A printed document

Which devices support QR code installation?

Most modern eSIM-compatible devices support QR code installation, including:

• iPhone
• iPad
• Samsung Galaxy
• Google Pixel
• Xiaomi
• Oppo
• Motorola
• Other Android devices with eSIM support

How to install a Figabytes eSIM on iPhone using a QR code

Step 1: Open Settings

On your iPhone:

1. Open Settings
2. Tap Mobile Data or Cellular

Step 2: Add the eSIM

1. Tap:
   • Add eSIM
   • Or Add Cellular Plan
2. Your camera will open automatically

Step 3: Scan the QR code

Use your iPhone camera to scan the Figabytes QR code.

Make sure:

• The QR code is clear
• The screen brightness is high
• Wi-Fi is stable
• The QR code is scanned only once

Step 4: Confirm installation

Tap:

• Add Cellular Plan
• Or Continue

Your iPhone will begin downloading the eSIM profile.

Step 5: Label your eSIM

Suggested labels include:

• Figabytes Travel
• Figabytes Data

Step 6: Configure line preferences

You may choose:

• Your primary SIM for calls and SMS
• Figabytes for mobile data

Step 7: Keep the eSIM turned off until arrival

If installing before traveling:

• Leave the Figabytes eSIM disabled
• Turn it on only after arriving at your destination

How to install a Figabytes eSIM on Android using a QR code

Android menu names may vary depending on the manufacturer.

Step 1: Open Settings

On your Android device:

1. Open Settings
2. Go to:
   • Connections
   • Or Network & Internet

Step 2: Open SIM settings

Depending on the device:

• Tap SIM Manager
• Or SIMs
• Or Mobile Network

Step 3: Add the eSIM

1. Tap:
   • Add eSIM
   • Or Add Mobile Plan
2. Select:
   • Scan QR Code

Step 4: Scan the QR code

Use your device camera to scan the Figabytes QR code.

Ensure:

• Wi-Fi is stable
• The QR code is clearly visible
• The code is scanned only once

Step 5: Download and install

Tap:

• Install
• Add
• Or Continue

Your Android device will begin downloading the eSIM profile.

Step 6: Label your eSIM

Suggested labels:

• Figabytes Travel
• Figabytes Data

Step 7: Keep the eSIM disabled until needed

If traveling later:

• Leave the eSIM turned off
• Activate it only after arriving

How to activate the eSIM after arrival

Once you arrive at your destination:

1. Turn on the Figabytes eSIM
2. Set it as your mobile data SIM
3. Enable Data Roaming
4. Wait a few minutes for network connection

Your device should automatically connect to a supported local network.

What if the QR code does not work?

If scanning fails:

• Confirm Wi-Fi is stable
• Clean your camera lens
• Increase screen brightness
• Restart the device
• Try scanning again slowly

If the QR code still does not work, you can use:

• Manual installation
• Activation details (SM-DP+ Address and Activation Code)

Important things to know

• QR codes are usually single-use only
• Do not scan the QR code multiple times
• Do not delete the eSIM unless instructed
• Removing the eSIM may require a replacement profile

Common setup issues

Camera does not recognize QR code

Try:

• Better lighting
• Another display screen
• Zooming the QR code slightly

eSIM downloads but no mobile data works

Check:

• Data roaming is enabled
• Figabytes is selected for mobile data
• APN settings if required

“Cellular Plan Cannot Be Added”

This may indicate:

• Carrier lock restrictions
• Unsupported device
• Previously used QR code

Need help with QR code installation?

If you experience issues scanning or activating your eSIM, visit Figabytes for additional installation support and troubleshooting guidance.