Simple steps to get you connected
Dial *#06# to check. if you see an EID number, you are good to go!
Select your destination and pick your travel eSIM data plan.
Set up the eSIM on your device by following the instructions in the app.
Published on January 6, 2026•3 min read
Help
Installing a Figabytes eSIM on your iPhone using a QR code is quick and straightforward. This method is recommended if you have access to another screen (such as a laptop, tablet, or another phone) to display the QR code.
Before you begin, make sure your iPhone is eSIM-compatible, unlocked, and connected to a stable Wi-Fi network.
Before You Start
Please ensure the following:
Your iPhone supports eSIM
Your iPhone is unlocked
You have a reliable Wi-Fi connection
Your iPhone is updated to the latest iOS version
Your Figabytes eSIM QR code is ready (sent after purchase)
Step-by-Step: Install eSIM via QR Code on iPhone
On your iPhone, open Settings.
Tap Mobile Data (or Cellular, depending on your iOS version).
Tap Add eSIM or Add Cellular Plan.
Your camera will open automatically.
Use your iPhone’s camera to scan the Figabytes eSIM QR code.
Make sure:
The QR code is clear and well-lit
You are connected to Wi-Fi
You scan the QR code only once
When prompted, tap Add Cellular Plan or Continue.
Your iPhone will begin downloading the eSIM profile. This may take a few moments.
You’ll be asked to label your eSIM.
Suggested labels:
“Figabytes Travel”
“Figabytes Data”
This makes it easier to identify your eSIM if you have more than one mobile plan.
When prompted, you can choose:
Which line to use for mobile data
Which line to use for calls and messages
If you’re traveling, we recommend:
Keeping your primary SIM for calls/messages
Using Figabytes for mobile data
If you’re installing the eSIM before traveling:
Leave the Figabytes eSIM turned off
Turn it on only after you arrive at your destination
This helps ensure your plan activates at the correct time.
How to Activate the eSIM After Arrival
Once you arrive at your destination:
Open Settings
Go to Mobile Data
Turn on your Figabytes eSIM
Enable Data Roaming for that eSIM
Set Figabytes as your mobile data line
Your iPhone should connect to a local network within a few minutes.
If the QR Code Doesn’t Work
If scanning the QR code fails:
Check that Wi-Fi is stable
Clean your camera lens
Increase brightness on the screen displaying the QR code
If the issue continues, you can install the eSIM using manual installation details instead.
Important Information
Each QR code can be used only once
Do not delete the eSIM after installation unless instructed
Deleting the eSIM may require a replacement profile
Need Help?
If you experience any issues during installation or activation, the Figabytes support team is available to assist you.